Cutting the rib
/control horn stiffeners with aviation straight snip cutter.
/control horn stiffeners with aviation straight snip cutter.
posted by Unknown at 7:41 AM
Friday, June 29, 2007
Previous Posts
- Trim cable bracket rivet hole locations on Ribs A...
- The center and two doublers shown here with all th...
- With the doublers marked and lightly center punche...
- With all set of three pilot holes drilled with #40...
- When the doublers are clamped, drill through each ...
- Marked hole positions on the forward spar/hinge do...
0 Comments:
Post a Comment
<< Home