I positioned the trim tab control horn onto the lower 
skin before drilling the six other locations with #40 bit.
skin before drilling the six other locations with #40 bit.
posted by Unknown at 3:17 AM
Saturday, July 14, 2007
Previous Posts
- On the upper skin, two centrelines at 9.25 and 10....
- Same applied for the lower skin..
- After completed the drilling on the upper skin..
- First i positioned the four ribs under the trim ta...
- The result speaks for itself.
- I have fast forwarded my next assembly to making o...
- Drilled and dimpled the rivet holes for the trim...
- Here, the trim cable slot in the upper right skin...
- After drilling the tip rib...The other right tip r...
- With the tip rib placed in positioned , drilling w...
0 Comments:
Post a Comment
<< Home