11 Sep 07Using 3/32" AN470AD3 universal head rivet to rivet the lower skin to the
remaining ribs at the 1st three holes on each rib.
posted by Unknown at 7:13 AM
Saturday, September 22, 2007
11 Sep 07Using 3/32" AN470AD3 universal head rivet to rivet the lower skin to the
remaining ribs at the 1st three holes on each rib.
Previous Posts
- 11 Sep 07Only the aft four holes on each attach an...
- 11 Sep 07View of partially riveted control horn as...
- 11 Sep 07Riveting the control horn assemblies and ...
- 11 Sep 07Another job well done!
- 11Sep07 Riveting the right tip rib.
- 11 Sep 07View looking outboard on the riveted left...
- 11Sep 07Completion of riveting 3/32" AN470AD3 univ...
- 11 sep07Rivet the left tip rib to the left outerm...
- Taking a photo after completing riveting the upper...
- Underneath view of Rib D after riveting.
0 Comments:
Post a Comment
<< Home