Marking the retainer clip , left/right bracket angle,forward/aft gate and left/right spacer on the provided raw stock.
posted by Unknown at 7:55 AM
Friday, June 29, 2007
Previous Posts
- The result of drilling the stiffeners.
- Drilling in progress...
- Rib/control horn stiffeners were clamped onto Rib ...
- Cutting the rib /control horn stiffeners with avia...
- Trim cable bracket rivet hole locations on Ribs A...
- The center and two doublers shown here with all th...
- With the doublers marked and lightly center punche...
- With all set of three pilot holes drilled with #40...
- When the doublers are clamped, drill through each ...
- Marked hole positions on the forward spar/hinge do...
0 Comments:
Post a Comment
<< Home