I now flipped the trim tab right side up and re-drilled the previous six rivet holes with #30 bit and clecoed as i went along.
posted by Unknown at 3:19 AM
Saturday, July 14, 2007
Previous Posts
- I positioned the trim tab control horn onto the lo...
- On the upper skin, two centrelines at 9.25 and 10....
- Same applied for the lower skin..
- After completed the drilling on the upper skin..
- First i positioned the four ribs under the trim ta...
- The result speaks for itself.
- I have fast forwarded my next assembly to making o...
- Drilled and dimpled the rivet holes for the trim...
- Here, the trim cable slot in the upper right skin...
0 Comments:
Post a Comment
<< Home