Riveting the nutplate on the rib stiffener.
posted by Unknown at 4:14 AM
Saturday, July 14, 2007
Previous Posts
- Close up view of the right doubler in position.
- Tada
- Finally, i riveted the right side doubler onto the...
- Close up view of the forward centre doubler.
- After completed the drilling..
- Next, i riveted the centre doubler to the forward ...
- Forward close up view of the left doubler in place.
- Tada.
- Evidence of me doing the riveting ..
- The spar and left doubler was riveted together ex...
0 Comments:
Post a Comment
<< Home