With 1/8" AN470AD4 universal head rivetts,finish riveting the controol horn stiffeners to Ribs A and B through the holes forward and aft of the trim cable bracket.
posted by Unknown at 5:00 AM
Monday, September 10, 2007
Previous Posts
- Here, Rib A was also riveted to the bracket assemb...
- The inner view of the bracket assembly after rivet...
- The trim cable bracket assembly being riveted to...
- The aft view..
- After completion of riveting..
- Here, the trim cable bracket assembly was riveted ...
- Another view of the riveted nutplates.
- Both nutplates have been riveted on Rib A and B.
- Riveting the nutplate on the rib stiffener.
- Close up view of the right doubler in position.
0 Comments:
Post a Comment
<< Home