After drilling the six holes..
posted by Unknown at 8:08 AM
Friday, June 29, 2007
Previous Posts
- Clamp the two horns together with side grips and...
- Re-clamping them with their other flanges together...
- Drilling holes A and B with #40 bit.
- Marking and index drilling the attach angles(left)...
- Marking the retainer clip , left/right bracket ang...
- The result of drilling the stiffeners.
- Drilling in progress...
- Rib/control horn stiffeners were clamped onto Rib ...
- Cutting the rib /control horn stiffeners with avia...
- Trim cable bracket rivet hole locations on Ribs A...
0 Comments:
Post a Comment
<< Home