Double checking the twist along the elevator.
posted by Unknown at 8:51 AM
Friday, June 29, 2007
Previous Posts
- Mark and "cut" the trim tab pushrod slot in the lo...
- Note, only the four pre-punched holes over Ribs A ...
- Drill the first three rib holes with #40 bits coun...
- Drill the remaining spar and rib holes.
- Positioning the lower right skin and drilling at t...
- Mark and cut the tip rib notches in the lower left...
- Both Ribs C and D were positioned bback with a pai...
- Here, Rib C and D were shown with the outboard rib...
0 Comments:
Post a Comment
<< Home