With the two doubler fabricated, they are then clamped together on the tip rib for some rivet holes marking.
posted by Unknown at 3:25 AM
Saturday, July 14, 2007
With the two doubler fabricated, they are then clamped together on the tip rib for some rivet holes marking.Previous Posts
- This may looked unfamiliar coz i have decided to f...
- I now flipped the trim tab right side up and re-dr...
- I positioned the trim tab control horn onto the lo...
- On the upper skin, two centrelines at 9.25 and 10....
- Same applied for the lower skin..
- After completed the drilling on the upper skin..
- First i positioned the four ribs under the trim ta...
- The result speaks for itself.
- I have fast forwarded my next assembly to making o...
0 Comments:
Post a Comment
<< Home