History repeated for the lower 
left skin ie. drilling the forward spar first,etc...
left skin ie. drilling the forward spar first,etc...
posted by Unknown at 8:52 AM
Friday, June 29, 2007
Previous Posts
- Double checking the twist along the elevator.
- Checking for any twist with a digital lever.
- Mark and "cut" the trim tab pushrod slot in the lo...
- Note, only the four pre-punched holes over Ribs A ...
- Drill the first three rib holes with #40 bits coun...
- Drill the remaining spar and rib holes.
- Positioning the lower right skin and drilling at t...
- Mark and cut the tip rib notches in the lower left...
0 Comments:
Post a Comment
<< Home